Reza

Run

10 min read

i want use v2rayng like every proxy app i want use v2rayng for server in android

ChatGPT said:

ChatGPT

To use V2RayNG as a proxy app on your Android device, follow these steps:

  1. Install V2RayNG:

    • Download and install the V2RayNG app from the Google Play Store or from a trusted APK source if it’s not available in your region.

  2. Configure the V2RayNG App:

    • Open the V2RayNG app after installation.
    • Tap the ”+” icon (usually at the top right) to add a new server configuration.
    • Enter your server details:
      • Address: The IP address or domain of your V2Ray server.
      • Port: The port your server listens to (commonly 443).
      • UUID: The unique user ID for your V2Ray server (this is like a password for your connection).
      • AlterID: A value provided by your server configuration (usually 64).
      • Network: The network type, typically “ws” (WebSocket) or “h2” (HTTP/2).
      • TLS: Enable if your server uses TLS (SSL).

  3. Enable the Proxy:

    • After entering your server details, tap “Save”.
    • You should now see your server listed in the main interface of V2RayNG.
    • Tap on the server to connect. The app should connect to the V2Ray server, and your internet traffic will be routed through the server.

  4. Configure Proxy Settings on Android:

    • Once V2RayNG is connected, go to Settings on your Android device.
    • Navigate to Wi-Fi settings, then tap on your connected Wi-Fi network.
    • Scroll down and find the Proxy option, select Manual.
    • Enter the local proxy address (usually 127.0.0.1) and local proxy port (often 1080 or the port you’ve set in V2RayNG).

This should enable your Android device to use the V2RayNG proxy for internet traffic. Let me know if you need further assistance!

4o mini

You said:

sever provider run proxy server (socks5 , http, ohter, xray , vlees,etc)

ChatGPT said:

ChatGPT

If you’re asking about how to run a proxy server (such as SOCKS5, HTTP, or other protocols like Xray and VLESS) provided by a server provider, here’s a general guide for setting up different types of proxy servers:

1. SOCKS5 Proxy Server (using V2Ray or Xray)

To set up a SOCKS5 proxy server on your remote server using V2Ray or Xray:

V2Ray Server Setup:

  1. Install V2Ray on your server: You can install V2Ray on a Linux-based server by following these steps:

    bash

    Copy code

    bash <(curl -s -L https://git.io/v2ray.sh)

  2. Configure the V2Ray Server: Open the V2Ray config file (/etc/v2ray/config.json) and add the following configuration for a SOCKS5 proxy:

    json

    Copy code

    { "inbounds": [ { "port": 1080, "listen": "0.0.0.0", "protocol": "socks", "settings": { "auth": "noauth", "udp": true } } ], "outbounds": [ { "protocol": "freedom", "settings": {} } ], "routing": { "rules": [] } }

    This sets up a SOCKS5 proxy on port 1080. You can change the port and configure other settings based on your requirements.

  3. Start the V2Ray Service: After saving the config file, restart the V2Ray service:

    bash

    Copy code

    sudo systemctl restart v2ray

Xray Server Setup:

Xray is similar to V2Ray, so you can set it up in the same way. You can install Xray by following Xray’s installation instructions.

The Xray configuration for SOCKS5 proxy will be similar to V2Ray. In the config file, you need to define an inbound with the protocol socks.

2. HTTP Proxy Server (using Squid or V2Ray)

To set up an HTTP Proxy server, you can use Squid or V2Ray.

Squid Proxy Setup:

  1. Install Squid on your server:

    bash

    Copy code

    sudo apt update sudo apt install squid

  2. Configure Squid: Open Squid’s configuration file (/etc/squid/squid.conf) and set up an HTTP proxy with the desired port, such as 3128:

    bash

    Copy code

    http_port 3128

    You can also add authentication, ACLs, or other advanced configurations as needed.

  3. Start the Squid Service:

    bash

    Copy code

    sudo systemctl restart squid

Now your HTTP proxy is running on 3128.

V2Ray for HTTP Proxy:

In the V2Ray config, set the inbound protocol to http:

json

Copy code

{ "inbounds": [ { "port": 8080, "listen": "0.0.0.0", "protocol": "http", "settings": { "auth": "noauth" } } ], "outbounds": [ { "protocol": "freedom", "settings": {} } ] }

3. Xray with VLESS Protocol

To set up a VLESS proxy server using Xray, follow these steps:

  1. Install Xray (as mentioned earlier).

  2. Configure the Xray Server for VLESS: Open Xray’s configuration file (/etc/xray/config.json) and add a VLESS inbound configuration:

    json

    Copy code

    { "inbounds": [ { "port": 443, "listen": "0.0.0.0", "protocol": "vless", "settings": { "clients": [ { "id": "UUID", "alterId": 64 } ] } } ], "outbounds": [ { "protocol": "freedom", "settings": {} } ] }

    Replace "UUID" with your actual UUID value. You can generate a UUID using online tools or with the command uuidgen.

  3. Restart the Xray Service:

    bash

    Copy code

    sudo systemctl restart xray

4. Other Proxy Types

  • V2Ray (VMess): This is another common protocol supported by V2Ray. You can follow the same steps as VLESS, just change the "protocol": "vless" to "protocol": "vmess" in the config file.
  • Shadowsocks: Shadowsocks is another popular proxy. You can install it using apt or pip, depending on your setup.

Once you have the server set up with the appropriate proxy protocol (SOCKS5, HTTP, VLESS, etc.), you can connect your V2RayNG or other proxy clients (on Android or other devices) using the server’s IP address and the appropriate protocol.

Let me know if you need further details or assistance with specific configurations!

{
  "inbounds": [
    {
      "port": 1080,
      "listen": "0.0.0.0",
      "protocol": "socks",
      "settings": {
        "auth": "noauth",
        "udp": true
      }
    }
  ],
  "outbounds": [
    {
      "protocol": "freedom",
      "settings": {}
    }
  ],
  "routing": {
    "rules": []
  }
}
ChatGPT said:

ChatGPT

To make your V2RayNG Android app act as a server, you’ll need to configure it accordingly. The configuration you provided looks like a standard V2Ray config file meant for a server-side setup, where you’re configuring inbound and outbound settings. V2RayNG typically doesn’t function as a traditional server in the way you’re configuring it here, but you can still set up a similar functionality by adjusting how V2RayNG is used on your device.

Here are the steps to configure V2RayNG on Android as a server-like setup:

  1. Install V2RayNG: If you haven’t already, download and install V2RayNG from the Google Play Store or from its GitHub releases.

  2. Configuration File: The file you’ve shared is for V2Ray’s server-side configuration. V2RayNG on Android typically uses a different structure. Here’s how you can configure it:

    • Open V2RayNG on your Android device.
    • Tap the ”+” icon to add a new configuration.
    • Select “Manual Configuration” and input the following:
      • Inbound (Server-side):
        • Protocol: Socks
        • Port: 1080 (or another port of your choice)
        • Auth: No Auth
        • UDP: Enabled
      • Outbound:
        • Protocol: Freedom
        • This ensures that the traffic is routed through the server (i.e., the device itself).

  3. Set Listen Address: In V2RayNG on Android, you don’t usually specify 0.0.0.0 for the listening address, since the app listens on all interfaces by default when running as a server. You don’t need to configure it in the same way as on a full server environment.

  4. Routing: The routing section in your configuration is currently empty. You can leave it blank or configure it based on your needs for different types of traffic routing, although this isn’t always necessary for basic usage.

  5. Start V2RayNG: Once your configuration is saved, start the V2RayNG service on your Android device. The app will act as a server, listening on the port you specified (1080) for incoming connections.

  6. Connect to the Android Server: To test the server, configure a client device (like a PC) to connect to the Android device using the SOCKS proxy on port 1080.

Important Considerations:

  • Network Permissions: Ensure that V2RayNG has the necessary permissions to use the network and that no other apps block the port.
  • Battery and Performance: Running V2RayNG as a server might have a higher power and resource consumption, especially on mobile devices.
  • Security: As V2RayNG on Android is primarily designed to work as a client, not a server, be cautious with security settings and connections. Ensure that your network is secure if using it publicly.

If you encounter any issues or need help with troubleshooting, feel free to ask!

4o mini

You said:

give me app android after run create proxy server on android

ChatGPT said:

ChatGPT

To create a proxy server on Android and use it like a V2Ray server (or similar proxy setups), you can follow these steps. While V2RayNG is a great tool for Android to use as a client, for a full proxy server setup, I will suggest a f

1. Drony (Root Required)

Drony is an Android app that can create a proxy server on your device. It is primarily used for HTTP/SOCKS5 proxies. It allows you to configure proxy settings to route your traffic th

Steps to set up a proxy server with Drony:

  1. Install Drony:

    • Download and install [Drony](https f

  2. Configure the Proxy:

    • Open
    • You can configure the port, usually set to 1080 fo

  3. Set Up Routing:

    • Drony allows you to route traffic to specific applications or system-wid

  4. Test the Proxy:

    • You can connect to the proxy from another device or application by specifying the IP address of your Android device and the port number (e.g., 1080).

2. Proxy Server (Simple Proxy App)

Proxy Server is a simple app that allows you to create an H

Steps to set up a proxy server with Proxy Server:

  1. Install Proxy Server:

  2. Configure Proxy Settings:

    • Open
    • Set the port (usually 1080) and enable the proxy.

  3. Start the Server:

    • Start th

  4. Test the Proxy:

    • To test the

3. V2RayNG (Client-Side Proxy, but with Workaround)

V2RayNG on Android is

Steps for V2RayNG:

  1. Install V2RayNG:

    • Download and install V2RayNG from the [Play Store](https://play.

  2. Configure V2RayNG:

    • You can configure V2RayNG as a SOCKS server, similar to the configuration you provided earlier, setting it to listen on port 1080.

  3. Connect from Other Devices:

    • On other devices, set the proxy server to your Android device’s IP address and port 1080.

  4. Start the Server:

    • On

Addit

  • Root Access: Some app
  • Wi-Fi Network: Ensure
  • Security: Be car

Let

4o mini

You said:

perefer links

ChatGPT said:

ChatGPT

Here are direct links to the mentioned apps for setting up a proxy server on your Android device:

  1. Drony (Root Required)

    • Drony on Google Play Store

  2. Proxy Server (Simple Proxy App)

    • Proxy Server on Google Play Store

  3. V2RayNG (Client-Side Proxy)

    • V2RayNG on Google Play Store

You can use these apps based on your preference for either a simple proxy, SOCKS5 server, or more advanced configurations with V2Ray. Let me know if you need further help with any of these options!

4o mini

You said:

link is wrong

ChatGPT said:

ChatGPT

I apologize for the incorrect links. Here are the corrected links for the apps mentioned:

  1. Drony (Root Required):

    • Unfortunately, Drony is not available on the Google Play Store anymore, but you can download it from a trusted third-party source like APKPure.

  2. Proxy Server (Simple Proxy App):

    • Proxy Server (Note: This app is no longer actively updated, and might not work on all devices.)

  3. V2RayNG (Client-Side Proxy):

    • V2RayNG on GitHub - Since it’s not available directly on the Play Store in some regions, GitHub is a reliable source for downloading the APK.

You can install these apps from these sources, but do make sure to be cautious when downloading APK files from third-party sites. Let me know if you need additional assistance!

Graph View